Please check prices directly by calling before placing orders, prices are changing due to currency devaluations.

O.T Table – Hydraulic Manual – NSL CHS-790 JW Medical (Korea)

1,800,000.00

 

  • Up/Down Adjusting
    1.Up : Fling open the pump pedal and keep pressing the foot pump pedals. The table will be lifted by hydraulic pressure.
    2.Down : Press the pump pedals to the floor, below the lower deactivation limit. The table will slowly go down.
  • Right-Left Tilting
    Push in and turn clockwise the right handle and the table will be tilted to the left (max. 20°). Turning the handle counterclockwise will tilt the table to the right (max. 20°).
  • Front /Rear Tilting
    Pull out and turn clockwise the right handle and the head section of the table will go downward (max. 25°). Turning the handle counterclockwise will lower the plate.
  • Back Section Angle Control
    Pull out and turn clockwise the left handle and the back section will rise (max. 80°). Turning the handle counterclockwise will lower the back section until the table is horizontal.

An O.T Table system is basically made up of three components: an operating table column, the table top and the transporter. Modern operating table systems are available as both stationary and mobile units. There are a wide range of table tops that can be used for both general surgery and for specialist disciplines. Mobile operating tables, however, tend to be equipped with a specific discipline in mind. The base, column and table top form a unit.

Operating table system with a stationary unit

Since the table column for a stationary O.T Table e system is firmly anchored to the floor, the additional necessary medical devices can easily be brought to the operating area and positioned. These devices include, for example, x-ray equipment, which can easily be slid under the table top. For personnel, the system offers improved leg space since disruptive foot geometry is no longer present.

Additional elements can be adapted to the operating table. This flexibility is very important since it enables the table to be adapted to suit the relevant patient or the surgical discipline.

The advantage of the mobile operating table, on the other hand, is that the position of the table can be changed within the operating room. However, the foot of the table limits the leg space available to the surgical team. The individual segments of the table top can be easily removed and replaced. They also permit x-rays and conduct electricity.

Another special feature of the operating table system is the ability to use appropriate interface modules to establish communication with diagnostics systems, for example, angiography, MR and CT. This is only possible with stationary columns since the systems require a fixed point.

Reviews

There are no reviews yet.

Be the first to review “O.T Table – Hydraulic Manual – NSL CHS-790 JW Medical (Korea)”

Your email address will not be published. Required fields are marked *

× How can I help you?